Filter
Top Products
LENS AAPERTURE AAND AAE MMODE ((Ref. FFig. 77)
(con’t)
Setting tthe aaperture oon tthe ccamera
Set the lens aperture ring so it is on the smallest f-stop for a Nikon camera, then set the f-
stop you want with the indicator of the camera body.
* The lens aperture varies with focusing movement. Cameras read the different lens
openings and automatically adjust the exposure properly.
* For further details, please read the instruction manual of your camera.
ATTACHING TTHE LLENS HHOOD ((Ref. FFigs 11, 22, 33 && 44)
1. Align the index mark on the hood with the corresponding index mark on the lens. Place
the hood onto the hood's attaching bayonet ring.
2. Turn the hood clockwise until it clicks. The index mark (O) on the hood appears on the
top when it is correctly attached.
Stowing llens hhood oon tthe llens
1. Detach and reverse the lens hood. Then align the index mark (O) on the hood with the
index mark on the lens. Place the hood onto the hood's attaching bayonet ring.
2. Turn the hood clockwise until it clicks. The index mark on the hood appears at the top
when correctly stowed.
TRIPOD SSOCKET ((Ref. FFigs. 88 && 99)
B01 has a socket for tripods. Secure the camera to the tripod with the tripod socket when
you use a tripod.
Changing tthe vvertical aand hhorizontal pposition oof tthe ccamera
1. Turn the tripod's locking knob in a counterclockwise direction to loosen it.
2. Rotate the camera using the lens as the axis, and align the indicator on the tripod socket
ring and the vertical and horizontal indicator.
3. Tighten the locking knob and lock the camera into place.
Removing tthe ttripod ssocket
1. Turn the tripod's locking knob in a counterclockwise direction, and line up the white
mark on the top of the knob and the tripod socket.
2. Pull the tripod socket's locking knob outward. Open the tripod socket ring, and remove
the tripod socket.