Filter
Top Products
2
This specification subjects to change without notice.
D4134992A
4. SPECIFICATION
4-1 Mechanical specifications
Overall dimensions and weight
Camera head: Refer to the attached camera head diagram.
Camera control Unit: 220(w) x 60(H) x 240(D) mm (excluding rubber casters)
Mass : approx. 2.6 kg
Camera cable: 6.3mm(dia.) x 3 m length
Lens mount: C mount
4-2 Electrical specifications
TV system:
Based on EIA standard
Pickup Device: Interline transfer CCD ICX422AL
Effective pixels: 768(H) x 494(V) pixels
Unit cell size: 11.6(H) x 13.5(V) micro m
Sensing area: 8.8(H) x 6.6(V) mm
(Equivalent to type-2/3 normal optical image
size respectively.)
Scanning method: 525 lines, 2:1 interlace
Sync. system: automatic switching between
internal / external synchronization
Scanning frequency: horizontal; 15.734kHz
Vertical; 59.94Hz
Aspect rate: 4:3
Subject illumination:
Standard: 100 lx, F4(3100K),(AGC OFF, gamma=1.0)
Minimum: 0.3 lx, F1.4,(gamma=0.45 with maximum gain)
Video output: VS: 1.0V(p-p)/ 75 ohm
Horizontal resolution: 570 TV lines
Vertical resolution: 350 TV lines
S/N: 56dB (AGC OFF, gamma=1.0 )
External sync input:
Input level: 2 to 6 V(p-p) for both HD and VD signals
Input impedance: 1 k ohm for both HD and VD signals
Method: 2:1 interlace
Polarity: Negative
Pulse width: HD: 6.4 +/- 3 micro sec
VD: 150 to 800 micro sec
Repeat frequency: f
H =15.734 kHz±2%
f
v =2 fH/525
Scanning lines: 525 lines