Filter
Top Products
D4153660A
[General Handing]
CAUTION
Instruction
!
!!
! Observe the following when installing the equipment:
· Do not cover the equipment with a cloth, etc.
· Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
Avoid
!
!!
! Do not place the equipment in locations subject to high moisture, oil fumes, steam, or
dust.
Otherwise, fire or electric shock may result.
Avoid
!
!!
! Do not install the equipment in locations exposed to direct sunlight or humidity.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Instruction
!
!!
! Use only specified the power cable and the connection cables.
Otherwise, fire or electric shock may result.
Instruction
!
!!
! When performing connection, turn off power.
When connecting the power cable and the connection cable, turn off the equipment power.
Otherwise, fire or electric shock may result.
Avoid
!
!!
! Do not expose its camera head to any intensive light (such as direct sunlight).
Otherwise, its inner image pickup device might get damaged.
Avoid
!
!!
! Avoid short-circuiting signal output.
Otherwise, a malfunction may occur.
Avoid
!
!!
! Avoid giving a strong shock against the camera body.
It might cause a breakdown or damage. If your camera is used in a system where its camera
connector is subjected to strong repetitive shocks, its camera connector is possible to break
down. If you intend to use your camera in such a situation, if possible, bundle and fix a camera
cable in the place near the camera, and do not transmit a shock to the camera connector.
Instruction
!
!!
! Contact your sales representative to request periodic inspection and cleaning (every
approx five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.