Filter
Top Products
47
Other
Applications
Playing/
Erasing Images
Basic
Photography
Additional
Information
Connecting to
the PC
Getting Ready
Change the Basic Settings of the Camera (continued)
Date & Time
Set the time and date.
For Date & Time , see “Setting the date and time” on page 22.
Sound
When you touch the key or icon, set whether or not to sound
the beep tone.
[ ] : Sounds the beep tone. (Default)
[ ] : Does not sound the beep tone.
Touch Sensor
When you touch the shutter button to take a photograph during
the play mode, the mode automatically switches to the photogra-
phy mode. This is called the “Touch sensor function”.
[ ] : Touch sensor is set to ON
[ ] : Touch sensor is set to OFF (Default)
Auto Power OFF
If no operation is carried out for a fixed period of time, the
power is automatically turned OFF to prevent battery wear.
This is called Auto power off. To return to the normal state,
slide the POWER switch.
[
] : If no operation is carried out for 1 minute, Auto power
off is activated. (Default)
[
] : If no operation is carried out for 2 minute, Auto power off is activated.
[ ] : If no operation is carried out for 3 minute, Auto power off is activated.
Version Information
Display the version of firmware.
“Firmware” refers to the software that controls the camera’s
operation. The firmware is pre-installed in the camera.
When the touch panel is touched while the version information is
displayed, the screen returns to the setup menu.
Format
Format (Initialize) the SD card.
For details on Format, see the following page.
☞ Formatting the SD card ➲ page 48
Sound
Auto power off
Version info.
Touch sensor
Date & time set