Toshiba IK-HR2D Camera Accessories User Manual


 
28
Items to be checkedSymptom
No picture
Is power supplied correctly?
Is the lens iris adjusted correctly?
Are the camera and video cables connected correctly?
Is the shutter mode set correctly?
Is the cable connector loose?
Are the other cables connected correctly?
Does the video output from the camera match with the input signals from
the monitor?
Unstable picture
Noise problem
Poor color
Is the monitor adjusted correctly?
Is the white balance of the camera adjusted correctly?
(in modes other than automatic tracking)
Is the matrix color correction set correctly?
Is the illumination sufficient?
8. BEFORE MAKING SERVICE CALL
Power supply
12V DC10%
Power consumptionApprox. 4.1 W
Image sensor
1/3 inch color CMOS sensor (Rolling shutter)
Output pixels
Horizontal : 1920, Vertical : 1080
Signal system
1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
Scan frequency
Horizontal : 67.43 kHz, Vertical : 59.94 Hz
Horizontal : 56.25 kHz, Vertical : 50 Hz
Horizontal : 33.72 kHz, Vertical : 59.94 Hz
Horizontal : 28.13 kHz, Vertical : 50 Hz
Horizontal : 44.96 kHz, Vertical : 59.94 Hz
Horizontal : 37.50 kHz, Vertical : 50 Hz
Sync system
Internal
Sensitivity
F 4 standard (2000 lx, 3000K)
Minimum illumination
8 lx standard (50 IRE, F1.4, gain 18 dB,
gamma setting ON (setting value 0), 3000 K)
Lens mount C mount
Operating temperature
(32 F) to 400F to 104
Operating humidity Less than 90% (non condensing)
Weight Approx. 148 g (0.326 lbs)
External dimension
44(W) × 44(H) × 78(D) mm (1.73”(W) 㽙㻃1.73”(H) 㽙㻃3.07”(D) )
Scene file
A, B, C, D, E
White balance
ATWAutomatic tracking white balance, AWBAutomatic white balance,
MANUALManual
Gain
MANUAL (Manual), OFF (0 dB)
Output signal
DVI (Digital RGB) DVI-D terminal
USB Video Class 1.1 mini-USB terminal (in conformity with USB 2.0)
Design and specifications are subject to change without notice.
9. SPECIFICATIONS