Filter
Top Products
18
(1. 3. 5) Changing each setting in RR mode
(a) Changing the partial read setting
1
Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either OFF or ON by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
( 2 ) GAIN (Video gain)
GAIN has two modes; MANU, OFF.
Set the "→" to MODE, push the [DATA UP], [DATA DOWN], and select mode among MANU, OFF. In the OFF
mode, gain is fixed to 0dB.
(2. 1) Changing each setting in GAIN
(a) Changing the gain in MANU mode
1
Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.
2
Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons.
-- SHUTTER --
MODE E.TRG
E.TRG RR
PART
OFF
<MODE = E.TRG E.TRG = SS>
• E.TRG mode
• Partial read switch OFF/ON
1P SNR, 1P SR, PW SNR, PW SR, RR
• Shutter mode MANU, SS, E.TRG
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
-- GAIN --
MODE MANU
MANU 0dB
• Gain mode MANU, OFF
• Manual gain -3 dB to 18 dB (10 dB step)
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN