Toshiba IK-WB02A Security Camera User Manual


  Open as PDF
of 4
 
3
2) Change the IP address of your PC to Use the
following IP address:
IP address: 192.168.0.50
Subnet mask: 255.255.255.0
Refer to the Operations Manual for more information.
3) Power on the IK-WB02A.
4) Run the Toshiba Camera Finder software to
automatically detect your cameras. Refer to the
Operations Manual for more details.
5) If the camera is not found, power off the camera and
repeat the above steps. (The camera takes
approximately 30 seconds to start.)
6) Click on User.
If you do not have a static IP address for your Internet
connection, Toshiba offers DDNS service that will allow
you to have an Internet address for your camera.
1) Register for Toshiba's DDNS service by clicking on
the link IK-WB02A settings under Configuration >
DDNS Settings.
2) Follow the instructions to set up your account.
Changing the Login ID and Password
Be sure to change the default login ID and password. You
are able to change important information and settings of
the camera through the Administrator Login. To have
higher security, be sure to change your login ID and the
password. Also, set the access rights because if they are
not set, everybody who logs in will be regarded as an
administrator.
1) From the Configuration menu, click Admin.
 previous