Toshiba IK-WB16A Security Camera User Manual


 
17
1. Drill a hole in the wall to feed the cables.
2. Drill four pilot holes into the wall; hammer the plastic anchors into the holes.
3. Fasten JK-WM16 to the wall with four screws.
4. Lead the cables through the hole, and connect the cable to the camera. Attach the
back cover and fasten with two screws.
5. Secure Network Camera with two screws.
6. Adjust the antenna to the appropriate position. (IK-WB16A-W only)
l
Wall Mount with JK-WM16 (JK-WM16 is not included.)
2
3
5
6
1