Filter
Top Products
13
Physical Description (Cont.)
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect
external input / output devices.
● 12V DC is outputted from 8-pin only when connected to a power supply.
The diagrams below apply when "Digital Input" is used for an alarm input.
NOTE
1 GND
2 Power input (DC 12V)
3 Power input (AC 24V)
4 Power input (AC 24V)
5 Signal GND
6 Digital Input
7 Digital output
8 12V DC Output
87654321
Pin Denition