Filter
Top Products
6
IMPORTANT SAFEGUARDS (Cont.)
9. Ventilation
This video product should never be placed near or over a
radiator or heat register. This video product should not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instructions have been adhered to.
10. Power Sources
This video product should be operated only from the type
of power source indicated on the marking label. If you are
not sure of the type of power supply to your location,
consult your product dealer.
11. Power-Cord Protection
Power-Supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
screws and the point where they exit from the product.
12. Installation
This video product should be installed on a firm and solid
part of the ceiling or wall. If installed on a soft and weak
place, the camera unit may fall. A person under it may be
injured and things under it may be damaged.
13. Lightning
For added protection for this video product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the power supply and cable system. This will
prevent damage to the video product due to lightning and
power-line surges. If lightning occurs, do not touch the unit
or any connected cables in order to avoid electric shock.
14. Overloading
Do not overload power supply and extension cords as
this can result in a risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this video product
through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electrical
shock. Never spill liquid of any kind on the video product.