Filter
Top Products
40
Status Check / Email
General
The General tab can be configured to enable use of the Alerts and Alarm emails that can be sent from the DVR to selected email
addresses. This requires the use of an SMTP.
1. Click Setup on the Display screen.
2. Click Administrative.
3. Click Status Check/Email.
4. Select the Enable Email Alarm check box.
5. Enter a From Name and e-mail Address.
Note This name and address will appear in the From line of the email
alert message.
6. Enter the SMTP information for the “From” email account. Contact the
email administrator for this information if necessary.
7. If using a secondary email account select the Use Secondary SMTP
check box and complete the SMTP information.
8. Click Test to check settings.
9. Click Apply when finished.
Users
The Users tab is used to set up the users that will receive Event email messages selected for the specified user.
1. Set up the General tab first.
2. Click the Users tab.
3. Select the type of Event to send email on.
4. Enter the User Name and E-mail Address of an email recipient.
5. Click Add.
6. Repeat for additional recipients and types of events.
Note A separate email notification for each type of event must be set
up for a single recipient to receive notifications for each type of
event.
7. Click Apply when finished.