Filter
Top Products
40
EN
Section 11
Troubleshooting
Troubleshooting
1.If the LCD image is not clear when shooting, how can the focus be adjusted?
Try to switch between Macro,Portrait Mode, and Normal Mode.(Macro Mode: For object in distance
about 20cm, Portrait Mode: For object in distance of 90cm~200cm. Normal Mode: For object in
distance beyond 200cm)
2.The ash is not working.
The camcorder is in Macro Mode.
The battery power is low.
3.The les on the memory card do not display smoothly when the LCD shows the “!” marking.
The” !” means the SD card is low speed or has wrong content inside. The way to solve this condition
is to format SD card by camcorder instead of PC.(Please read the detail Format instruction in Section
5).
4.Why is camcorder Flash not active when taking pictures?
Make sure that the focus range is NOT set at Macro mode, as ash is disabled in this mode. Scroll
through Picture mode and set Flash as Auto; note that Flash OFF is the default pre-set mode for
normal picture -taking. In Auto mode camcorder ash res ONLY when necessary (in dark setting as
example).
5.Why do some of my indoor pictures look blurry and dark?
Camcorder extends pictures exposure time under low light/ indoor condition. Keep camcorder (and
photographed subject) steady for several seconds when taking pictures. Shutter will sound when
picture has been taken.
6.How do I charge battery?
Computer will not charge battery when connected. You must use ONLY the supplied AC charger.
Camcorder must be turned OFF; blinking light conrms charging, but light is constant when charging
has been completed.