Toshiba P20 Camcorder User Manual


 
43
EN
Section 10
Troubleshooting
Troubleshooting
If the LCD preview is not clear while shooting, how can the focus be adjusted?1.
Try to switch between Macro and Normal Mode.
The les on the memory card do not display smoothly when the LCD shows the “!” marking.2.
The “!” means the SD card is low speed or is having wrong content inside. The way to solve this
condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed Format
instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
Why do some of my indoor photos look blurry and dark?3.
The camcorder extends photo exposure time under low light/ indoor condition. Keep the camcorder
(and the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
How do I charge battery?4.
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF;
blinking light conrms charging, and the light becomes constant after the charging is completed.
In AC charging Mode, the light will turn itself off automatically after 3~5 minutes. The full charge time
is about 4 to 4.5 hours. (Actual charging time may vary. It depends on the battery conditions.)
After connecting the USB cable to the computer, ……5.
The disk [DV] shows the internal memory of the camcorder.1.
[Removable Disk] shows the external memory. (Under the circumstances of within the SD/2.
SDHC/SDXC card in the camcorder)
The disk [DVAP] shows the built-in CAMILEO UPLOADER application is saved at this disk. 3.
Please DO NOT format this disk or delete the application inside; otherwise, the CAMILEO
UPLOADER application can not function.