Filter
Top Products
- 34 -
- DHCP: Select this option when your network uses the DHCP
server. When the camera starts up, it will be assigned an IP
address from the DHCP server automatically.
- Static IP: Select this option to assign the IP address for the
camera directly. You can use IPSetup to obtain the related
setting values.
IP Enter the IP address of the camera. The
default setting is DHCP.
Subnet Mask Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Default Gateway Enter the Default Gateway of the camera.
The default setting is your router’s LAN IP
address.
Primary/
Secondary DNS
DNS (Domain Name System) translates
domain names into IP address. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
- PPPoE: Select this option when you use a direct connection
via the ADSL modem. You should have a PPPoE account from
your Internet service provider. Enter the User Name and
Password. The camera will get an IP address from the ISP as
starting up.
NOTE Once the camera get an IP address from the ISP as starting
up, it automatically sends a notification email to you.
Therefore, when you select PPPoE as your connecting type,
you have to set up the email or DDNS configuration in
advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Select the
Enable option to enable this feature. Then, select the Provider