- 65 -
- NEXT: When multiple cameras connected, click this button to
switch the video view to the next camera.
TIP To set the time interval of scanning, click SETTING > Other
and then adjust the time from 1 to 10 seconds in the Time
interval of scan option.
CAMERA Panel
- TRIGGER OUT: Click to turn on the trigger out connector of
the camera. This button is available only when the connected
camera supports the trigger out connector, which is used to
control the external device connected to the camera, such as a
light.
- SNAPSHOT: Click to capture a still image using the selected
camera and save the file in the computer.
- RECORD: Click to start recording a video clip using the
selected camera. Click again to stop recording and save the
file in the computer.
- TALK: Click to speak out through the camera. Please note
only one user is allowed to use this function at the same time.
- LISTEN: Click to receive the on-site sound and voice from the
camera.