Filter
Top Products
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP651W / TV-IP651WI
19
Detection Areas: From the live image shown on this screen, you can left-click
on blocks of the grid shown to indicate which parts of the screen you would like
to monitor for motion.
Upload
On this screen you can enter details of an FTP Server that you want to upload images
from the camera to.
Host Address: The IP address of the FTP Server
Port Number: The port number to connect to the FTP on, default port is 21.
User Name: The user name of the FTP account.
Password: The password for the user account on the FTP.
Directory Path: The path you want the files to be uploaded to on the FTP.
Passive Mode: If the camera is behind a firewall, you might wish to enable
Passive mode to allow the camera to upload the pictures.
Time Schedule: Check Enable upload image to FTP server to enable the Upload
function.
o Always: Selecting this option allows snapshots to be uploaded to your
FTP as soon as you click Save.
o Schedule: Selecting this option allows you to configure specific times
when you want the snapshots to be uploaded to your FTP server.
o Motion Detection: Selecting this option sets the camera to upload
images upon detection of motion.
o Manual Operation: Selecting this option means the user is responsible
for taking a snapshot from the camera to upload.
Video Frequency: Users can select in frames per second (1, 2, 3 or auto, in auto
this could go to 4). The user can also select a duration for each frame from 1 to
65535 seconds.
Base File Name: Enter the prefix for the filename of each snapshot taken by the
camera.
File: If Overwrite is selected, only a few images will be constantly refreshed,
depending on how many snapshots you choose to have sent. Select Date/Time
Suffix and the pictures will be named with a date and time also. Select a
Sequence Number Suffix up to 1024 and all the pictures will be numbered from
1-1024. Up to 1024 pictures can be configured. Picture number 1025 will reset
to number 1.