Filter
Top Products
19
• Optimized motion detection range is 6 - 18 feet for the camera. The farther
away an object is, the less accurate the motion detection.
• Avoid pointing the camera directly at any bushes, tree branches, or moving
objects that might naturally move due to winds. Otherwise, the motion
detection feature may record unnecessarily.
You can mount the AppCam 23 with the stand on the bottom (on a flat surface
such as a table-top), on the side (on a wall), or on the top (on the ceiling or
under an eave or overhang).
1. Use your mobile device to test the places where you are considering
mounting the camera. Hold the device in that location; if it still receives
live video in that spot, the location is good.
Attach the camera stand if you have not already done so.
2. Unplug the camera from the power source and install it.
3. After the camera is installed, reconnect power.
4. Attach the Ethernet jack cap.
DETAILED APPCAM 23 INSTALLATION PROCEDURES
Mount the AppCam 23 Base
1. Hold the base of the camera stand where you
want to mount it and mark the
location of the screw holes.
2. Use the included screws and
anchors to attach the base to
the wall or ceiling. You can
also screw the base into a flat
surface such as a tabletop if
needed.