Filter
Top Products
9
TROUBLESHOOTING CAMERA PAIRING
Consult the following table for camera pairing troubleshooting suggestions:
If... Try...
the camera’s signal
status icon shows no
bars
• making sure the camera is plugged in and the green
LED is on.
• making sure that the camera’s antenna is swiveled
up in position and the receiver’s antenna is
extended.
• making sure the camera is paired to the correct
channel
• re-pairing the camera and receiver
the camera’s signal
status icon shows
one or two bars or the
video quality is poor
See “General Guidelines” on page 5 for tips on
improving video quality.
the camera won’t pair
with the receiver
• making sure the camera is plugged in and the green
LED is on.
• pressing and releasing the pairing button quickly. Do
not press and hold
LINk
.