Filter
Top Products
4. Adjust the camera as needed.
Suction Mount
1. Insert the suction base into the base clip as
shown:
2. Firmly press the camera with the suction base
attached onto glass or metallic surfaces.
3. Adjust the camera as needed.
Clip-Mount
Clip the UDRC13 on ledges and shelves.
1. Press the mounting clip as shown.
2. Place the unit over the mounting surface and
release.
3. Adjust the camera as needed.
Connect Power
1. Insert the AC adapter power plug into the
camera’s DC adaptor input jack.
2. Plug the other end into a 120 volt AC (standard
indoor) power outlet or surge protector.
3. Press
POWER
and make sure the green power
LED
turns on. If it doesn’t, try reconnecting the
AC adapter, making sure the power outlet isn’t
controlled by a wall switch.