Filter
Top Products
3
Installing Stand
Insert the stand into the corresponding slot in the back cover and rotate the stand clockwise
until it is locked into place.
Powering It On
Connect the power cable of the attached power adapter to the DC-IN jack of the digital photo
frame and connect the power adapter to the AC power socket.
Turn on the power: When the power switch is OFF, the power is turned off. Move the power
switch to ON to turn on the power or move it to LED to turn on the LED indicators.
Tip: Power input: AC100~240V, 50~60Hz. Power output: DC5V/1.8A. Power consumption: ≤7.5W.
Operating temperature: 0ºC~40ºC. Operating humidity: ≤90%.
Getting Prepared