Filter
Top Products
Copy Images From Your PC onto Internal Memory
Copy Images from Camera Memory Card onto Internal Memory
Insert your camera memory
card into the appropriate slot.
Select the menu key on the touch
pad to open the main menu.
Select the device from which you are
transferring images and press the select key
on the touch frame.
Select the FILE mode.
Scroll through the les by
using the up and down
arrows. Select the desired le
by touching the right arrow
key on the touch frame.
Hold the menu key on the
touch frame to open the
internal memory sub-window.
Then using the select key,
choose the COPY function.
Choose NAND by right
arrow key.
Press the select key to start
the copy process. File copy
is complete when you see
“Finished.”
DPF_QSG_DPG807-1W_2W Rev.1A 09-08-08
Copyright © 2008 ViewSonic Corporation. All rights reserved.
Connect the small end of the
USB cable to the USB port on
the digital frame.
Connect the larger end of the
USB cable to the USB port on
your computer.
Double-click on the appropriate
driver letter to access the internal
memory.
Open the folder on your computer
that contains the images you wish
to copy to the frame.
Drag and drop the le you se-
lected to the photo frame drive.
Repeat until you have copied all
desired images to the frame.
Some computers may
not recognize the exter-
nal device on the rst
try. If after a few minutes, the
external drivers are not seen,
unplug the USB cable, turn the
photo frame off and then back
on. Repeat steps one and two.
Five new driver letters
will appear under the
“My Computer” icon in
windows. Each one represents
the available card slots on the
digital photo frame. The rst
driver is for internal memory.
NOTE: The touch frame
function buttons will not oper-
ate when connected to a PC
through the USB cable. Dis-
connect the USB cable before
operating the touch frame
buttons.
ViewSonic service website: http://www.ViewSonic.com/support/
Toll free number: US (800) 688-6688, Canada (866) 463-4775
5 6 87
4321
1 2 3 4
5 6 7