VistaQuest VQ1100 Digital Camera User Manual


 
- 5 -
Press and hold the ON/OFF button for 2 second to start the camera. The
camera will beep once, indicating that it is ready. The LCD screen will display
digits and symbols.
Aim the camera and compose the scene by looking through the viewfinder (2).
• Press the shutter button to take a picture. Buzzer will sound as the
confirmation of the taken picture. LCD will show number of pictures taken.
Sleep mode: With the power ON, if you do not take another picture within 60
sec., camera will turn to the "Sleep" mode to save batteries. The blank LCD
screen identifies the "Sleep" mode. (Press the ON/OFF button held 2 second
can manual turn on/off the "Sleep" mode.)
Re-activating camera from "Sleep" mode. Press the ON/OFF button (9)
held 2 second to re-active the camera for taking next picture.
Please note, that when batteries disconnected or discharged, the
memory, and all taken pictures will be erased.
Power Consumption
• The batteries allow you to take, and store all pictures inside the memory for
approximately two weeks (camera stays in the "Sleep" mode)
• After that, LCD screen starts to blink, informing you that the batteries are low.
You must download the stored pictures into the computer within a day;
otherwise all pictures will be lost.