Filter
Top Products
2. Press the Up button again to change from the auto flash to the red-eye reduction flash mode. The
icon
will appear on the LCD indicating that the red eye reduction function has been activated.
3. Press the Up button once more until you see the icon
appear on the LCD screen. This indicates
that the flash is forced on.
4. To turn off the flash function, press the Up button again until the icon
is displayed on the LCD.
Note: A “Low Power” message will appear on the LCD screen, if you select the flash function when the battery
power is insufficient. To continue using the camera with the flash, please change the batteries.
Digital Zoom function
You can magnify your subject using the digital zoom up to 8X. Use the T and W buttons to adjust the zoom.
1. Press the T button to zoom in on your subject.
2. Press the W button to zoom back out.
Anti-shake function
Your Digital Camera has a function that prevents photos coming out blurry as a result of trembling or shaking
while the photo is being taken. This function allows you to take good quality photos even without the use of a
tripod. To set this function:
1. Press the Menu/OK button.
2. Press the Up/Down button and select the Anti-shake option.
9