Filter
Top Products
Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
Hardware installation
Please verify that your product package contains all the
accessories listed in the foregoing Package Contents.
Depending on the user’s application, an Ethernet cable
may be needed. The Ethernet cable should meet the
specs of UTP Category 5 and not exceed 100 meters in
length.
Upon powering up, the LED will become lighted first and then the device will go through
booting process. The LED will be steady orange for getting IP address. After getting IP
Address, the LED will blink green every second and the red-color is always on.
The Network Camera will first detect Ethernet. Operating in either network mode, the
LED will blink green-color as heartbeat to indicate alive.
Connect the power adapter jack to the Network
Camera before plugging in to the power socket. This will
reduce the risk of accidental electric shock.
User's Manual - 7
VIVOTEK - A Leading Provider of Multimedia Communication Solutions