Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 29
Network
This section explains how to congure wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is intended
to be accessed by local computers� The default setting of Network Type is LAN� Remember to click Save
when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN�
Use xed IP address: Select this option to manually assign a static IP address to the Network Camera�
1. You can make use of VIVOTEK installation wizard 2 on the software CD to easily set up the Network
Camera on the LAN� Please refer to Software Installation on page 10 for details�
2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�
Subnet mask: This is used to determine if the destination is in the same subnet� The default value is
“255.255.255.0”.
Default router: This is the gateway used to forward frames to destinations in a different subnet� Invalid
router setting will fail the transmission to destinations in different subnet�