Filter
Top Products
- 51 -
www.vivotek.com
Appendix
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition LED color
Loading system after power on Steady red, blue, green
During booting procedure Steady red, blue, green
Detecting and setting network Steady green and blue. Blink red till physical
network and IP address are confirmed.
After network is setup (system up) Blink green every second and steady red
During the upgrade firmware process Blink green every second and fast blink red
Enable audio Steady blue. Disable audio will turn off blue
LED.
Reset and restore
There is a button in the back side of the Network
Camera. It is used to reset the system or restore the
factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.