Filter
Top Products
- 57 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Remote Controller
Model PZ61x2 provides a remote controller to command the camera’s pan/tilt and
other functions. The direction control part provides the function as on the main web
page.
The Pan/Patrol/Stop functions are also the same as on the main web page.
“Auto Patrol” This button commands the camera to patrol between the preset
positions on the patrol list that was set on the “Camera control page”. After each
patrol cycle, the camera stops at the original staring position. “Auto Pan” This
button commands the camera to pan from the current position to the left most or
right most and back. After panning both horizontal end positions, the camera would
stop at the original starting position.
“Center” This calibrates the camera’s position to aim at the center as the camera
boots up.
“Stop” This stops the auto movements (auto pan & auto patrol) of the camera.
Direction control
area
Auto movement
control area