A SERVICE OF

logo

55
Audio board
The audio board that came with your computer should look like the
figure that follows.
Note: The system has two microphone-in ports (front and rear).
However, you can not use both of them at the same time. The
default setting for your system enables the microphone-in port in
front and disables the one at the back. Refer to your online guide
for instructions on how to enable the rear microphone-in port.
Label Description
JP1 Audio connector - connects to the AUDIO2
connector of the mainboard
CN1 USB connector - connects to the USB2 connector of
the mainboard
CN2 and CN3 USB ports
JK1
Microphone-in port (front)
JK2 Audio-out port