
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
Bosch Security Systems | 6/12 | 38947D
3.2.1 Alarm Groups Screen
This selection allows setup and
arm/disarm control of the 99 alarm
groups. Any number of point
transmitters can be assigned to an
alarm group in the Subscriber
Database’s Advanced Screen. Each
transmitter can only be assigned to one
alarm group.
An alarm group can be manually armed
and disarmed or assigned to a schedule
to automatically arm and disarm the
alarm group.
Figure 355: Alarm Groups Screen
Alarm Group Name
Enter a descriptive name to identify
the function of the points in this
alarm group.
Alarm Group #
This is the number of the alarm group
(1 to 99).
Arming State of this Alarm Group
The Off, On, and Automatic by schedule
fields control the arming state of this
alarm group.
Off (disarmed)
Clicking this button disarms the alarm
group. The alarm group remains off
(disarmed) until it is manually changed
in this screen to On or Automatic by
schedule.
On (armed)
Clicking this button arms the alarm
group. The alarm group remains on
(armed) until it is manually changed in
this screen to Off or Automatic by
Schedule.
Automatic by Schedule
Clicking this button assigns the alarm
group’s arming state to be controlled
by the indicated schedule. When the
schedule is active (on or armed), the
alarm group is armed. When the schedule
is off (disarmed), the alarm group is
disarmed. Any number of alarm groups
can be assigned to the same schedule.
First
Clicking this button takes you to alarm
group 1.
Previous
Clicking this button takes you to the
next lower alarm group from the one
displayed. It does not wrap around. It
is disabled at alarm group 1.
Next
Clicking this button takes you to the
next higher alarm group from the one
displayed. It does not wrap around. It
is disabled at alarm group 99.
Last
Clicking this button takes you to alarm
group 99.
3.2.72 Alarm Group State Screen
This selection displays a list of the
alarm groups that are armed and have
one or more transmitters (points)
faulted. The points are presented
because they were not restored when
their automatic schedule armed or there
was an alarm while the alarm group was
on.
Figure 366: Alarm Group State Screen