A SERVICE OF

logo

Preparing and Installing the 9A426-02 Module
2-18
The Reset Switch
The Reset switch is located under the top plastic tab as shown in Figure 2-12. Use
the reset switch to reset the module’s processor, shutdown (power down) the
module, and/or restart the module.
To reset the module’s i960 processor, press the reset switch twice within three
seconds.
To shutdown the module, press and hold the reset switch for three or more
seconds.
To restart the module, press the reset switch momentarily.
To enhance module security, use SNMP management to disable the reset switch.
Figure 2-12. The Reset Switch
SMB
CPU
Reset Switch