A SERVICE OF

logo

Open as PDF
next previous
Operator's Guide 75
Paper Jam Detect
Pressing
YES
prints out:
•
Off
•
On (factory default)
The printer uses a paper motion sensor on top of the left tractor to detect
paper jams. If the paper is supposed to move but it does not, then the
printer flashes the
PAPER
indicator and sounds the beeper.
Off: Disables paper jam detection.
On: Enables paper jam detection.
Paper Speed
Pressing
YES
prints out:
•
11 in./sec (factory default)
•
5 in./sec
This is often referred to as the slew rate.
11 in./sec: This the normal slew rate for single-part 18 lb paper.
5 in./sec: Consider using this slower slew rate for very light, heavy, or
multipart paper. The slower slew rate is gentler on the paper's sprocket
holes.