A SERVICE OF

logo

PoleVault Systems Installation • Installation — Stage 4
2-23
Installation — Stage Four, cont’d
b. Screw the UPB 25 adjuster plate back onto the base of the
pipe and tuck the cables through the back of the adapter
plate.
c. Replace the projector (with the UPB 25 bracket attached)
on the adjuster plate and tighten the adjuster plate
locking nuts.
d. Connect the switcher’s VGA and RCA cables to the
projector.
e. Connect the IR/RS-232 projector control cable to the
projector.
f. Connect the projector power cord, ensuring the cord
exits via the cable notch in the PMK cover plate.
4b
Reattach UPB bracket and
4c
projector
4d
Cable the projector