Information Services
Instructions for Specific User Device Setup Page: 3
Updated 3/20/2005
Step
26:
Click the drop-down box and choose
<Password>. Click the X in the top right
corner of the Initial Settings box.
Step 27: You are now at the Odyssey Client Administrator screen. Double-click the
Connection Settings icon.
Step 28: The Connection Settings dialog box will appear. Click the Default tab. Click
to select the User Account option. The Adapter and Network options will become
available. Accept the Adapter setting’s default value. The Network option should be
<
Password>, if it’s not, click the drop-down to the right and choose <Password>.
Step 29: Click the Wait until the user’s desktop appears before using Odyssey to
connect to the network if: textbox. Any wired adapter already connected will be
automatically selected and will be the default.
Step 30: In the Connection Settings dialog box, click the GINA tab. Click the Install
Odyssey GINA module button. This will install the Odyssey GINA. When finished,
you will be notified. Click OK in the notification dialog box.
Step 31: Click OK at the bottom of the Connection Settings dialog box.
Step 32: Click the
red X to close the Odyssey Client Administrator box. Close all other
open windows and reboot.
Step 33: After reboot, at the Novell client login box, click on advanced. Click on the
802.11x tab. Click to select the Login Using Odyssey Client option. Click the Save
As Default button.
Note: LDAP is not installed and should never be installed on the wireless devices. It
does not function properly with wireless networking. When the device is at the Novell
Login it does not have a network connection required for LDAP to do the context lookup.
You will need to enter the context manually, and from that point forward, choose it from
the drop down box on the NDS tab if a different user needs to login.
