14
HI 710005 110VDC voltage transformer
HI 710006 220VDC voltage transformer
HI 731318 Tissue for wiping the cuvettes (4pcs)
HI 731321 Glass measurement cuvettes (4pcs)
HI 731325 Cap for cuvette (4pcs)
HI 93703-0 Solution for calibration AMCO-AEPA-1 at 0 FTU,
30 mL
HI 93703-10 Solution for calibration AMCO-AEPA-1 at 10 FTU,
30 mL
HI 93703-50 Cuvette cleaning solution, 230 mL
ACCESSORIES
WARRANTY
All Hanna Instruments meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions. This
warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair
is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization number from the Cus-
tomer Service department and then send it with shipping costs
prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner,
Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode
Island, 02895 , USA.
Hanna Instruments reserves the right to modify the design, construc-
tion and appearance of its products without advance notice.
