A SERVICE OF

logo

Removal and replacement procedures 43
4. Pull the power cable and fan cable out.
5. Unlock the cable clamp as shown in step 5.
6. Pull the bundle of cables out.
7. Loosen the thumbscrews on both sides of the system tray.
8. Pull out the system tray.
9. Pull the system tray out until it stops on its own. An arrow sticker should be visible on the side of
the system tray.
10. Disconnect the power cable on the system board.
11. Disconnect the USB cable, fan cable, Mini-SAS cable and LED cable on the system board.
CAUTION: Avoid pinching the cables when sliding the system board tray into the chassis.