HP UPS Management Module Service Menu 80
• Press the Enter key to refresh the screen.
• The management module resets automatically to allow configuration changes to take effect.
Service Menu
This menu only appears when accessing the management module using a terminal emulation program.
Option number Submenu Description
1 Module Configuration Opens the HP UPS Management Module
Configuration Utility (on page 80)
2 UPS Pass-through Bypasses the management module and allows
direct communication with the UPS
3 Exit Exits the Service menu and resets the
management module
HP UPS Management Module Configuration Utility
Option number Submenu Description
1 UPS Monitor Displays UPS status information
2 Network Configuration Enables network configuration for the
management module
3 System Configuration Enables you to set the date, time, and daylight
saving time parameters
4 User Accounts Enables you select an entry to set up and
configure user accounts
s Save New Changes and
Restart
Saves changes and resets the management
module
r Restore Configuration to
Manufacturer Settings
Restores parameters to default settings
UPS Monitor submenu
Option number Submenu Description
1 UPS Alarms Displays active UPS alarms
2 UPS Meters Displays UPS input and output parameter data
3 Battery Displays battery data, battery status, and the
Battery submenu
4 Power Protection Displays the Power Protection submenu
0 Previous Menu Returns to the previous menu
