Receiving a Document
2 - 7 Basic Operations
Manual Receive
In the manual receive mode, you can talk to the caller and start the receive the
document after the conversation is over.
1
When your unit rings, answer the phone.
2
If it is evident that it is a fax transmission,
press the START Key on your unit and
then replace the phone on the cradle.
•
An intermittent tone after picking up
the handset indicates a fax call.
•
When your unit recognizes the signal as
a fax call, the LCD shows this message.
•
If the sending location is recognized,
the blank is filled in with the name or
telephone number of the location.
•
When the transmission is complete this
message is displayed. The number at
the end of the second line indicates the
number of pages sent.
•
When the document starts to print the
following message is displayed. The
return of the second line shows that
other operations such as sending a Fax
or making a copy are now available.
•
When the final page prints, the display
shows the following message. The
number shows the number of pages
printed.
NOV.07 12:34 100%
-SET DOC. FACE DOWN-
*TALKING*
( ) 100%
-SET DOC. FACE DOWN-
(CHICAGO) 100%
-SET DOC. FACE DOWN-
*RX COMPLETE*
CHICAGO 20P
*PRINT DOC* 90%
-SET DOC. FACE DOWN-
*PRINT COMPLETE*
20P
