18 Plasma Monitor
Operation
- You can adjust picture contrast, brightness, color, sharpness, and tint options
to the levels you prefer.
1. Press the MENU button and then use
DD / EE
button to select the PICTURE menu.
2. Press the
GG button and then use
DD / EE
button to select the desired picture option
(
Contrast, Brightness, Color, Sharpness, Tint).
3. Press the
GG button and then use FF / GG button to make appropriate adjustments.
4. Press the OK button to save.
Manual Picture Control (
Manual Picture Control (APC
set to
set to Off
option)
option)
- If the Monitor is connected to external equipment using sRGB, set sRGB to On
to adjust for the color difference.
1. Press the MENU button and then use
DD / EE
button to select the PICTURE menu.
2. Press the GG button and then use
DD / EE
button to select sRGB.
3. Press the
GG button and then use
DD / EE
button to select On or Off.
4. Press the OK button to save.
sRGB (only RGB-PC, DVI-PC Modes)
sRGB (only RGB-PC, DVI-PC Modes)
- Use Fleshtone to select the desired skin color option.
1. Press the MENU button and then use
DD / EE
button to select the PICTURE menu.
2. Press the
GG button and then use
DD / EE
button to select Fleshtone.
3. Press the
GG button and then use FF / GG button to make appropriate adjustments.
• The adjustment range is 0 ~ 3.
4. Press the OK button to save.
Fleshtone ( V
Fleshtone ( V
ideo, S-V
ideo, S-V
ideo, Component1-2, RGB/DVI-DTV Mode only)
ideo, Component1-2, RGB/DVI-DTV Mode only)
PICTURE
Prev.
APC
ACC
Fleshtone GG
Contrast 100
Brightness 55
Color 55
Sharpness 60
Tint 0
PICTURE
Menu
0
PICTURE
Prev.
APC
ACC
sRGB GG
Contrast 100
Brightness 55
Color 55
PICTURE
Menu
On
Off
PICTURE
Prev.
APC
ACC
Fleshtone
Contrast 100 GG
Brightness 55
Color 55
Sharpness 60
Tint 0
PICTURE
Menu
