A SERVICE OF

logo

F-1
DIAGRAMS
F-1
BIG REDâ„¢ 600
A
M22253
ELECTRIC
SHOCK
CAN KILL
WARNING
Do not operate with covers removed
Disconnect input power before servicing
Do not touch electrically live parts
Only qualified persons should install,
use or service this equipment
1.
TURN OFF THE ENGINE AND DISCONNECT THE NEGATIVE BAT
TERY CABLE.
2. REMOVE THE SCREWS THAT SECURE THE LOWER CONTROL
PANEL AND
OPEN THE PANEL.
3. WHILE HOLDING THE RCD MOUNTING BRACKET REMOVE TH
E TWO SCREWS
SECURING THE COVER PLAT E AND RCD MOUNTING BRACKET.
SET THE RCD
MOUNTING BRACKET AND SCREWS ASIDE AND DISCARD COVER
PLATE.
(SEE FIGURE 1).
INSTRUCTIONS FOR INSTALLING A 2-POLE RESIDUAL CURRE
NT DEVICE
TO PROTECT THE 240V SINGLE PHASE RECEPTACLE
LOWER CONTROL
PANEL
FIGURE 1
RCD MOUNTING
BRACKET
COVER PLATE
.