A SERVICE OF

logo

Open as PDF
next previous
B-3
OPERATION
B-3
ITEM DESCRIPTION
1
Location for Optional
Remote Voltage Control
(See Accessory Section For Kit Number).
2
Location for Optional Burnback and Postflow Timer Kit (See Accessory Section For Kit Number).
3 Thermal LED, Motor Overload.
4 Cold Feed - Gas Purge Switch, press the switch up to feed wire with weld output off. Press the
switch down for gas flow with weld output off.
5 2 step - Trigger Interlock switch.
6 Wire Feed Speed Knob.
7 Gun Receiver Bushing.
8 Trigger Connector 5-pin amphenol for connecting the MIG gun trigger. See Installation Section
for detail.
LF-72
FRONT PANEL CONTROLS AND CONNECTIONS
CASE FRONT CONTROLS
FIGURE B.1
1
2
3
4
5
6
7
8