A SERVICE OF

logo

C-2
ACCESSORIES
C-2
RANGER 3 PHASE
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
Electrode Holder & Cable
Work Clamp & Cable
Headshield
WIRE
FEED
LN-25
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides cold
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
LN-15
K449 LN-15 - Includes internal contactor for across
the arc operation (no control cable). Provides cold
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Magnum
Innershield Gun and wire bushing is required for gas-
less welding.
TIG
PRO TORCH
®
TIG Torch
K1783-9 PTA 26V TIG Torch
Magnum Parts Kit and Argon Gas
KP509 Parts Kit
K930-2 TIG Module (Requires)
Requires K938-1 Contactor Kit,
K936-4 Control Cable, and
K814 Arc Start Switch
Optional TIG Module Accessory:
K939-1 Docking Kit
K937-45 Control Cable Extensions (45ft.)