19
Loading Print Media: In the stand/MPD and 2000 sheet paper drawer
Upper paper tray
The upper paper tray is equivalent to the
multipurpose drawer. The method of
loading paper and the paper that can be
used are the same as for the multi-
purpose drawer. Refer to the description
of the multi-purpose drawer.
Lower paper tray
The lower paper tray holds 2,000 sheets of
A4 or 8½" x 11" paper (80 g/m
2
or 20 lb).
Use the following procedure to load paper
into the large capacity tray.
If the paper size or paper type is changed
in either paper tray, the tray settings must
be changed in custom settings. Refer to
Setting the Paper Size and Type.
1. Pull out the large capacity tray until it
stops.
2. Load paper into the right-hand paper
feed tables. This holds approximately
1,200 sheets.
3. Raise the paper guide and load paper
into the left-hand paper feed table.
This holds approximately 800 sheets.
After loading paper, be sure to return
the paper guide.
4. Gently push the large capacity paper
tray firmly all the way into the printer.
5. Set the paper type.
