7EN
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
• Danger of explosion if battery is incorrectly replaced.
Replaceonlywiththesameorequivalenttype.
For rst-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
Press POWER again to switch the unit to
standby mode.
» The red standby indicator turns on.
» The backlight on the display panel turns off.
4 Play
Play from disc
1 Press SOURCE repeatedly to select the
DISC source.
2 Pull to open the disc compartment on the
top of the device.
3 Insert a disc with printed side facing
upward.
4 Close the disc compartment.
» Play starts automatically. If not, press
.
Play from USB
Note
• Make sure that the USB device contains playable audio
content.
1 Press SOURCE repeatedly to select the
USB source.
