2 © Titan Tool Inc. All rights reserved.
PISTON SEAL LUBRICANT
Specially formulated to prevent materi-
als from adhering to the piston rod,
which becomes abrasive to the upper
seals. Piston Lube will break down
any material that may accumulate in
the wet cup and keep it from drying.
8 oz individual..........................700-925
1 qt individual...........................700-926
8 oz, case of 12 .......................700-911
1 qt, case of 12.......................700-912
AIRLESS HOSE
I.D.x Length Part #
1/4” x 25’ .......................316-513
1/4” x 50’ .......................316-505
3/8" x 50' .......................690-375-50
3/16" x 9' .......................550-222
3/16" x 15' ......................550-221
HIGH PRESSURE SWIVELS
Pressure Rated at 5000 psi
Gun-to-Hose
1/4” NPS (F) x 1/4” NPS (M).........500-428
Hose-to-Hose
1/4” NPS (M) x 1/4” NPS(M) ........500-424
FITTINGS
Description
Part #
1/4" x 1/4" Hose Coupling............490-012
1/4" x 3/8" Hose Coupling............490-016
3/8" x 3/8" Hose Coupling............490-014
T-Fittings 1/4" x 1/4".....................490-036
Tip Filter Retainer ........................520-046
1/4" Mx1/4"F Swivel Union...........490-005
1/4" Mx3/8"F Swivel Union...........490-032
Retaining Nut Adapter..................490-007
High Pressure Fl. Gauge .............730-394
Parts Lists and Repair Information...15-26
230V Service Instructions................15
Main Assembly ..........................16–17
Replacement Labels........................17
Motor Assembly.........................18–19
Armature Replacement ...................18
Motor Housing Replacement...............19
Gear Box Assembly.........................20
Gear Replacement...........................21
ON/OFF Switch................................21
Power Supply Cord..........................21
Motor Brush Replacement...............21
Filter Block Assembly ......................22
Pressure Switch Replacement ........23
Replacement of the Bypass Valve ..23
Filter Replacement...........................23
Fluid Section Assembly ...................24
Siphon Assembly.............................24
Pump Repair....................................25
Low Rider Frame Assembly ............26
High Rider Frame Assembly............26
Skid Assembly .................................26
Equipment Job History.........................27
Limited Warranty..................................28
Table of Contents
Accessories............................................2
General Repair & Service Notes............3
Maintenance/Service Record .................4
Warnings ................................................5
Aviso (En Español).................................6
Attention (En Français) ..........................7
Notice: Fire or Explosion Hazards ...8–10
Startup Procedure ................................11
Spraying ...............................................12
Cleaning Procedure..............................13
Flushing Specifications.........................14
Airless Tip Selection.............................13
Troubleshooting..............................13–14
Airless Gun .......................................13
Spray Pattern....................................13
Airless Pump.....................................14
Accessories
LIQUID SHIELD
Cleans and protects spray systems
against rust, corrosion and premature
wear.
Case of 12 (1 quart bottles) ...700-888
1 quart ....................................700-889
U.S. Patents: 3,936,002; 4,220,286;
4,457,472; 4,508,268; 4,494,697;
4,500,119; 4,626,004; 4,611,758;
4,744,571; 4,728,213; 4,768,932;
4,755,638; 4,768,929; 4,840,543;
4,908,538; 5,074,467; 5,425,506
