27
Inlet Accessories
Hoses and Valves
840-211 BLEED LINE ASSEMBLY WITH VALVE
ITEM PART
NO. NO. DESCRIPTION QUANTITY
1 944-620 Bleed Valve 1
2 103-111 Bleed Line Assembly 1
3 539-078 Hose Assembly 1
4 103-117 Tube 1
944-620 BLEED VALVE ASSEMBLY
ITEM PART
NO. NO. DESCRIPTION QUANTITY
1 944-005 Knob 1
2 860-721 Nut, Lock 1
3 944-023 Valve Stem 1
5 944-004 O-Ring 1
6 944-026 Valve Stem Stop 1
7 569-170 Ball, T.C. 1
8 945-003 Gasket, Copper 1
9 944-904 Valve Seat 1
SERVICE INSTRUCTIONS
The 944-620 Series Bleed Valve has a Tungsten Carbide Seat (9) and should not require frequent replacement. The Tungsten Carbide Ball
(7), in normal service, will last a long time because it rotates and wears evenly. If there is leakage, replace the ball. CAUTION: Open the
Adjustment Knob (1), to full counterclockwise position before unthreading Valve Seat (9), from Valve Body (4). If the Valve Stem (3) is rotated
inwardly with me ball removed, the
37)(O-Ring (5), may require replacement. If mere has been leakage from the valve stem, the
37)( O-
Ring should be replaced. IMPORTANT
: The Valve Stem Stop (6), must be unthreaded from the Valve Stem (3), with a socket screwdriver,
then the valve stem can be threaded out of the Valve Body. CAUTION: All non-moving threads must be assembled with Loctite Sealant,
Speeflo Part # 426-051.
103-829 SYPHON HOSE ASSEMBLY
NO. NO. DESCRIPTION QTY
1 103-625 Rock Catcher 1
2 103-550 Tube 1
3 103-682 Hose Clamp 2
4 420-650 Hose, 3/4” 4.5'
5 103-130 Spring 1
6 103-119 Clip 1
7 194-661 Adapter 1
