ENGLISH
|
5
•
The Handle (1) connects to the top of the Telescopic Pole, and is designed for maximum grip
and comfort.
•
The Telescopic Pole (2) connects the Mop Head to the Handle, and can be extended and
retracted for comfortable use and convenient storage.
•
The Extension Lock (2a) is used to adjust the length of the Telescopic Pole.
•
The Cord Brackets (3) provide a convenient way to neatly wrap the power cord for storage.
•
The On/Off Switch (4), located on the back side of the Mop Head, is the foot-operated button
that activates and deactivates the unit. The On/Off Switch is pressed to turn the unit on (the
red Power Indicator Light will illuminate), then pressed again to turn the unit off (the red Power
Indicator Light will turn off).
•
The red Power Indicator Light (5) illuminates whenever the power cord is plugged into an
electrical outlet and the On/Off Switch is pressed, to indicate that unit is receiving power.
•
The green Heating Indicator Light (6) illuminates while the Boiler is actively heating water.
When the Boiler is empty, the Light will turn off.
•
The Mop Head (7) is the unit’s main body, housing the Boiler and producing steam through the
Steam Nozzles.
•
The Boiler (8) is the internal reservoir where water is held and converted into steam. For optimal
steam production, the Boiler should be lled with no more than 10 oz. (300 ml.) of water.
•
The Boiler Cap (8a) is designed to safely contain steam inside the Boiler, while providing easy
access to the Boiler Fill Hole. The Boiler Cap must be unscrewed and removed in order to ll
the Boiler with water.
•
The Boiler Fill Hole (8b) is the opening through which water is poured into the Boiler. The Boiler
Cap must be removed in order to access the Boiler Fill Hole.
•
The Pad Grips (9), located on the bottom of the Mop Head, are designed to adhere to fastener
strips on the Microber Pads.
•
The Steam Nozzles (10), located on the bottom of the Mop Head, evenly disperse the ow of
steam produced by the Boiler.
•
The Measuring Cup (11) provides an easy and convenient way to consistently ll the Boiler with
the optimum amount of water (10 oz. / 300 ml.).
•
The Microber Pads (12) each attach to the Pad Grips on the bottom of the Mop Head. The
Pads are designed to clean scuffs and stains from hard oors. The Microber Pads are reusable
and machine washable. Two Microber Pads are included.
•
The Resting Pad (13) serves as a base for the unit, providing a convenient place for it to rest as
the Boiler heats and cools without risk of damage to delicate oor surfaces. The Resting Pad
has a smooth side and a textured side – the textured side is designed to capture excess
moisture and should face upward, so that Mop Head rests on top of it.
