I I’
Lint screen
Pull straight
out.
The lint screen
is inside the dryer
drum, on the
back wall. Clean
it betore each
toad.
A screen
blocked by lint
can increase
drying time
1. Use the finger holes to pull the lint
screen straight out.
2. Lightly squeeze the body, as
shown, while pulling the cover off
3.
4.
5.
Roll lint off the
screen with
your fingers.
DO NOT rins
or wash the
screen. Wet
lint is hard to
remove
Squeeze body;
pull cover off.
Replace the cover on the body of
the lint screen.
Push the lint screen straight back
rn until it clicks into place:
CAUTION: RUNNING THE DRYER WITH THE
LINT
SCREEN LOOSE,
DAMAGED OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO
FABRtCS AND DRYER PARTS. OR CREATE A FIRE NAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard.This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
ELECTRIC DRYERS
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
l
Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l
Avoid injury or damage - do not
put hands inside cabinet.
l
Make sure dryer is cool.
1.
2.
3.
4.
Remove back panel [electric]
or lower access door (gas).
Avoid damaging wires,
thermostats, funnel or igniter.
Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
Replace panel; reconnect and
re-level dryer.
7
