Lint screen
The lint screen
is inside the dryer
drum, on the
back wall. Clean
it before each
load. A screen
blocked by lint
Pull straight
can increase
out.
drying time.
1. Use the finger holes to pull the lint
screen straight out.
2. Lightly squeeze the body, as
shown, while pulling the cover off
3. Roll lint off the
screen with
your fingers.
DO NOT rinse
or wash the
screen. Wet
lint is hard to
remove.
Squeeze body;
pull cover off.
4. Replace the cover on the body of
the lint screen.
5. Push the lint screen straight back
in until it clicks into place.
CAUTION: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE,
DAMAGED OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO
FABRICS AND DRYER PARTS, OR CREATE A FIRE HAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
Cleaning should be done only by a qualified person.
0
l
Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l
Avoid injury or damage - do not
put hands inside cabinet.
’ Make sure dryer is cool.
1. Remove back panel.
2. Avoid damaging wires or ther-
moStats
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and re
level dryer.
