Mixed loads
Drying times
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
To reduce wrinkling, take the load
from dryer as soon as tumbling stops
This is important for permanent press,
knits and synthetic fabrics.
Drying times will vary depending on:
0 amount of morsture in the clothes.
0 type and weight of the fabric.
l
size of the load.
0 room temperature around the
dryer.
l
temperature of the wash rinse
water.
0 amount of lint in the lint screen.
0 dryer temperature selection.
See page 6 in your “Dryer Guide”
for more information.
End-of-cycle signal
The dryer sounds a signal to let you know
when the cycle IS frnished. The signal cannot be
turned off and is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items
that should be taken out as soon as the dryer
stops.
8
