Filter
Top Products
Chapter 3: Web Interface
Fig.17 WebCAM DNS Server IP
Primary DNS Server IP
This item sets WebCAM primary DNS Server IP address. This is the default
DNS and cannot be edited.
Secondary DNS Server IP
Use this to set WebCAM Secondary DNS Server IP address. WebCAM will
use the Secondary DNS Server IP address if the Primary DNS Server IP
address is not working.
iv. Port Number
Fig.18 WebCAM Port Settings
HTTP Port Number
This determines the LAN port from which the webpage (using HTTP protocol) is
accessible thru your Router. By default the LAN port number is 80.
If this port is changed, say to 82, then http://xxx.xxx.xxx.xxx:82 (where
xxx.xxx.xxx.xxx is WebCAM LAN IP address as shown on the LCD) must be
used in order to access WebCAM web interface in LAN.
Communication to Camera Port Number
This determines the LAN port from which the video image (using UDP protocol)
is streamed thru your Router. By default the LAN port number is 9001.
v. Ethernet
Fig.19 WebCAM Ethernet Settings
Connection Type
This sets WebCAM communication speed. By default, it is set to Auto Sense.
WebCAM will reboot, if this setting is changed.
i. WebCAM Dynamic DNS
This free service allows the user to alias a dynamic IP address to a static
hostname. No matter how many times your ISP change the IP, you will be able
to locate WebCAM.
WebCAM - user manual -19-